Home > Cleaning Machine

  • Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800
Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800

Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800

  • Product description: Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800
  • INQUIRY

Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800


Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800 Characteristics:

1、 Quick & super clean effect:

SMT steel mesh, copper mesh, resin mesh, screen, PCB misprinting board and PCBA board, can quickly and effectively clean the surface after printing to the residual solder paste, red plastic and other pollutants;

2、 Standard water-based automatic cleaning mode:

In a cleaning room to complete the cleaning, rinsing, drying all the cleaning process, small size, compact structure;

3、 Full Process Visualization:

The cleaning room is equipped with a visual window, the cleaning process at a glance;

4 、 Wide range of applications:

SMT stencil, screen, India plastic governance, SMT scraper, large size PCBA, Misprint plate;

5 、 DI water real-time resistivity cleanliness monitoring system:

Used to monitor the cleaning effect, the resistivity can be set, resistivity control range 0 ~ 18MΩ;

6、 Nozzle pressure adjustable and symmetrical design:

To solve the SMT steel mesh in the cleaning process by high pressure spray conditions under the tension problem;

7、 Standard cleaning tank heating system:

Water-based process on the needs of heating emulsification, greatly improving the cleaning efficiency, shorten the cleaning time;

8、 Low operating costs:

Built-in filter device can be used to achieve the recycling of solvents to extend the pollutant load saturation time, at the end of the cleaning using compressed air recovery pipeline and the pump within the residual chemical solution, can effectively save 50% cleaning agent;

9、 Can be cleaned oversize size PCBA (800mmx800mm)

10、 High pressure fan + four wind knife wind cut dry:

Using 5.5HP high pressure fan, more efficient (3 to 5 minutes), more thoroughly!

11、 Full Chinese large touch screen interface:

Color touch screen, PCL control, according to the program run; can set the solution temperature, cleaning time, rinse times / time, rinse temperature, drying time, drying temperature, conductivity monitoring and other parameters.




Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800 Technical specification:

1 Applicable screen size: maximum 750(L) ×750(W) × 40(H)mm Special size should be customized

2 Liquid tank capacity 50L* 2PCS

3 Cleaning method Steel net reciprocating movement, cleaning liquid high pressure liquid jet

4 Rinse method: Open loop DI water or closed-loop chemical spray

5 Drying method: Four wind knife wind cut dry

6 Cleaning time: 2-5mins

7 Cleaning isolation time: 1min

8 Rinse time: 2-5 mins

9 Rinse Drying time: 3-5 mins

10 Resistivity tester range: 0--18MΩ

11 Liquid heating temperature: Room temperature 60

12 Liquid tank heater power(KW) 9KW

13 Rinse tank heater power(KW):       9KW

14 noise: Less than 65 decibels

15 Drying temperature: Room temperature --90

16 Drying heater power KW): 9KW

17 The total power is about: 33KW Normal working power 3-6KW

18 Chemical liquid level filter: 0.45μm

19 DI water filter: 0.45μm

20 DI water supply: 30~60L/min

21 DI water pressure: 0.4mpa

22 water intake: G3/4 Inner teeth

23 Drainage: G3/4 Inner teeth

24 Row of chemical liquid mouth: Φ 12 hose

25 Spray pump: 4HP Stainless steel multi - stage centrifugal pump

26 Exhaust size: Φ123mm

27 Power supply / gas source: AC380V  50HZ  90A  /  0.45Mpa-----0.7Mpa

28 net weight: 500Kg

29 dimension: about 1500mm(L) ×1260mm(W) × 1900mm(H)




Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800 Partial pictures of Product:




Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800 Application:

CW-800 Is a "water-based cleaning fluid cleaning SMT steel mesh" cleaning process designed for the third generation of steel mesh cleaning machine

Automatic completion of cleaning, rinsing, drying process.(Using a unique double four spray bar cleaning, rinse design, double four wind knife wind cut dry design, rinse with online filtering, to ensure cleanliness)

Used in: SMT stencil, copper mesh, plastic mesh, resin net, plastic fixture, PCB misprinting board and a small amount of PCBA cleaning, can effectively clean the surface after printing and the hole wall residual solder paste, red plastic and other pollutants

A wider range of applications:


SMT Steel Mesh           SMT Copper Mesh           PCBA/Misprinting Board



Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800 Washing Schematic:

Using a unique double four spray bar cleaning, rinse design (1 map identifies each nozzle 10 nozzles), Double four wind knife wind cut dry design (2 logo), Greatly improve the cleaning efficiency, rinse with online filtering, to ensure cleanliness)




Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800 Cleaning Process Flow Chart:



Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800 CE Approval:



Water - based Steel Mesh /Stencil Cleaning Machine SMT Washer Manufactory,CW-800 Our Service:

1.Engineers available to service machinery oversea.

Engineers are available to be sent to freign countries to do machinery training and offer technical support.

2.Mature technique & forerunner to process makes high quality machinery.

As largest manufactory in South China, we have 12 years experience on PCB separator machines and soldering machines. pcb router machine

Our R&D team continuously upgrade the existing machines to meet the market development trend.

3.Effective customer service. pcb router machine

All of us together are stronger and wiser than any one of us individually. To succeed, we must assume responsibility, cooperate with fellow associates and withdepartments, effectively comminicate with one another, foster enthusiam and participate in decision-making. To be easy reachable by customers and provide prompt replies to solve their problems and create value for customers.

4.One year warranty for the machines except accessories. b router machine

Robust frame construction and Japanese steel blades obtained good appraise and recognized by and oversea clients. We offer parts for replacement under warranty free of charge, clients only need to bear freight charge.

Our mission:

Ongoing PCB industry PCB separator technological innovation, to create greater value, allowing customers to success

Our Vision:

PCB industry to become the world's leading solution providers PCB separator. pcb router machine





CONTACT US

Contact: Doreen

Phone: 13537348526 (Skype:s2@smtfly.com)

Tel: 86-0755-33581320

Email: s2@smtfly.com

Add: Building 2, Gang Hua Xing Industrial Park, Chongqing Road, Fuyong Town, Shenzhen, China 518103