Home > PCB Router Cutting Machine

  • PCB Router Cutting Machine For Tab - Routed PCBA Depaneling Solution, CW-F04
PCB Router Cutting Machine For Tab - Routed PCBA Depaneling Solution, CW-F04

PCB Router Cutting Machine For Tab - Routed PCBA Depaneling Solution, CW-F04

  • Product description: PCB Router Cutting Machine For Tab - Routed PCBA Depaneling Solution, CW-F04
  • INQUIRY

PCB Router Cutting Machine For Tab - Routed PCBA Depaneling Solution, CW-F04


Simple Introduction:

It is a stand alone router machine specially designed to route (depanelize) printed circuit board assemblies (PCBA) into individual assemblies. The machine can accomodate larger PCBs in its two table configuration with maximum panel size of 650mm x 500mm. Its advanced control software provides user friendly "visual" programming for rapid and accurate online programming.


Feature:

1. Manual loading/unloading processing

2. 2-way sliding working exchanger to limit the idle time and simultaneously loading and unloading to reaches the utmost output value.

3. Friendly touch panel with 10X CCD camera to minimize the time of programming

4. Auto fiducial mark point check and cutting route auto compensation to ensure the cutting accuracy

5. Auto router bit check to prevent the bit break incomplete cutting.


Detailed Product Description:

Warranty: 12 Month Free Of Charge

Cutting Area: 450*350mm

Bit Change: Manual

Temp• PCB Thickness:0.5-3.0mm

Router Bit Diameter: 0.8 ~ 2.0 Mm

Name: PCB Router Separator



Specification:

Model

CW-F04

Standard working area

320*320mm

Power

220V, 4.2KW

Manipulator Repeatability

±0.02mm

Resolution

±0.01mm

Board Positioning

Dual workstation with nest fixture or pin fixture

Panel Location

Located by tooling holes or edges of PCB

Loading

Manual

Unloading

Manual

Panel Size

320*320mm(standard)

Panel Thickness

0.5-3.5mm

Spindle motor

KAVO Spindle

Tool Change

Manual

Dust filtration system

3KW Vacuum Cleaner

Vision system

High resolution CCD video camera

Programming

Vision assisted point to point manual teaching

Editing Function

Dry run vision assisted / test run mode

Machine weight

500kgs

Machine dimension

113*140*108cm



Why us:

1.Engineers available to service machinery oversea.

Engineers are available to be sent to freign countries to do machinery training and offer technical support.

2.Mature technique & forerunner to process makes high quality machinery.

As largest manufactory in South China, we have 12 years experience on PCB separator machines and soldering machines. pcb router machine

Our R&D team continuously upgrade the existing machines to meet the market development trend.

3.Effective customer service. pcb router machine

All of us together are stronger and wiser than any one of us individually. To succeed, we must assume responsibility, cooperate with fellow associates and withdepartments, effectively comminicate with one another, foster enthusiam and participate in decision-making. To be easy reachable by customers and provide prompt replies to solve their problems and create value for customers.

4.One year warranty for the machines except accessories. b router machine

Robust frame construction and Japanese steel blades obtained good appraise and recognized by and oversea clients. We offer parts for replacement under warranty free of charge, clients only need to bear freight charge.

Our mission:

Ongoing PCB industry PCB separator technological innovation, to create greater value, allowing customers to success

Our Vision:

PCB industry to become the world's leading solution providers PCB separator. pcb router machine


Machine Details:



Product Samples:



CE Approval:


FAQ:


1.- I see according to the specification there may be up to 1000 files. How many joints can we have per file ? I need to know the programing limitation of the machine.

R: No limit on the joints per each program. More than 1000 files.

2.- Can you send me user manual of the robot ? I need to see the programing abilites. I need to know every parameter we can set for every joint.

R: We will offer the instruction manual when delivery, don't worry about that.
3.- Also where are stored the programs - in the robot or in memory card ?

R: The programs are stored in the robot.
4.- What is the teaching pedant for besides programing ? Can I copy soldering programs to another robot CWDH-411?

R:Yes, program can be copied from 1 robot to another robot.

In generally, each PCB has 1 program with hundreds of joints.

There are total 144M storage, 100000 joints take 3M.

If there are 1000 joints per each program, the robot could store 4800 files.

5.- Is it possible to start the program from particular joint (not from the begining but for example from 5th joint)?

R: Yes, you could start from particular joint.
6.- Is it possible to execute only one joint ?

R: Yes, it is OK.
7.- Is it possible to set X,Y,Z offest for every joint ? What I mean is if the soldering tip can be set in the way it comes into the joint under some angle?

R: Yes, you could set offset, solder paste capacity, soldering time for every joint.
8.- Is it possible to set the tip to come out from the joint under angle as well ?

R: Yes, no problem.
9.- Can I set feeding/backing speed for every joint ?

R: Yes, you could set the soldering time for every joint.
10.- I didn't see how much power is the soldering heater (I can only see the total machine is 2300Watts) ?

R:It is 150W.
11.- Also what is so powerful in the robot so it is 2300 watts ? Our current robot is 600 Watts total power and it is almost the same. The soldering tip is 400 Watts and it has PC inside. So I expect the motors to be no more 150 Watss totally. But here we have 2300 Watts? I am just curious what is so powerful ?

R: The machine is total 750W, including the soldering heater 150W.
12.- Do we need air for the machine and if so how much ?

R: Yes, need air. In generally, it works by 2-3 kg/c. Do you have a air pump in your factory? If yes, it is enough, because standard industrial air pump has 6-7 kg/c.
13.- Also do you have soldering tip like below (this is what we use right now)?

R: Yes, we could custom make according to your soldering requirements based on your PCB if we don't have exsiting tips.

14.- I forgot to ask you also if it is possible to program arrays with the robot.

R:Yes, it is ok to program arrays.

15.-What is the speed for x-y movement?

R:X/Y axis is 600mm/s, max speed for Z axis is 400mm/s













CONTACT US

Contact: Doreen

Phone: 13537348526 (Skype:s2@smtfly.com)

Tel: 86-0755-33581320

Email: s2@smtfly.com

Add: Building 2, Gang Hua Xing Industrial Park, Chongqing Road, Fuyong Town, Shenzhen, China 518103