Home > HSC Soldering Machine

  • HSC Pulse Bonding Machine,CWPDY21
HSC Pulse Bonding Machine,CWPDY21

HSC Pulse Bonding Machine,CWPDY21

  • Product description: HSC Pulse Bonding Machine,CWPDY21
  • INQUIRY

HSC Pulse Bonding Machine,CWPDY21


HSC Pulse Bonding Machine,CWPDY21 Features:

1.On~line conveyor loading and landing automatically
2.Has alarm system, manual test & adjustment is available
3.Double side soldering at the same time
4.Advanced temp. controlling system, high precision temp & soldering time controlling
5.Stable temp. profit, high frequency inverter frequency, short power cycle.
6.LCD display for soldering temp.
7.Closed loop PID temperature control with visible LED display.
8.Three section of heating setting, the temperature rises quickly and steadily

9.20 groups of programs can be stored, using RRPROM to prevent data from missing.

 

HSC Pulse Bonding Machine,CWPDY21 Specification:

Model: 

CWPDY2IN 

Power: 

6*2 KW 

Power Supply: 

220V 50Hz 

Inverter frequency: 

4*2 KHz 

Load sustained rate: 

20% 

Heating up and cooling down:

Yes 

Temp. range: 

50-600 

Cooling mode: 

Air 

Max product size: 

80mm 

Pressure range: 

10-50N 

Temp. Control Precision: 

±3% 

Thermocouple: 

E or K optional 

Thermode head size: 

5~50mm 

Weight: 

200kgs 

Dimension: 

1600*700*1300mm 

 

HSC Pulse Bonding Machine,CWPDY21 CE Approval:



 

HSC Pulse Bonding Machine,CWPDY21 Our Service:
# 1 day delivery
# 24 hours fast response
# Largest manufactory in South China
# 100% responsible for quality
# 12 years experience

 

HSC Pulse Bonding Machine,CWPDY21 FAQ:

1.- I see according to the specification there may be up to 1000 files. How many joints can we have per file ? I need to know the programing limitation of the machine. 

R: No limit on the joints per each program. More than 1000 files.

2.- Can you send me user manual of the robot ? I need to see the programing abilites. I need to know every parameter we can set for every joint. 

R: We will offer the instruction manual when delivery, don't worry about that.
3.- Also where are stored the programs - in the robot or in memory card ?

 R: The programs are stored in the robot.
4.- What is the teaching pedant for besides programing ? Can I copy soldering programs to another robot CWDH-411? 

R:Yes, program can be copied from 1 robot to another robot.

In generally, each PCB has 1 program with hundreds of joints.

There are total 144M storage, 100000 joints take 3M.

If there are 1000 joints per each program, the robot could store 4800 files.

5.- Is it possible to start the program from particular joint (not from the begining but for example from 5th joint)? 

R: Yes, you could start from particular joint.
6.- Is it possible to execute only one joint ?
 

R: Yes, it is OK.
7.- Is it possible to set X,Y,Z offest for every joint ? What I mean is if the soldering tip can be set in the way it comes into the joint under some angle?
 

R: Yes, you could set offset, solder paste capacity, soldering time for every joint.
8.- Is it possible to set the tip to come out from the joint under angle as well ?
 

R: Yes, no problem.
9.- Can I set feeding/backing speed for every joint ?
 

R: Yes, you could set the soldering time for every joint.
10.- I didn't see how much power is the soldering heater (I can only see the total machine is 2300Watts) ?

R:It is 150W.
11.- Also what is so powerful in the robot so it is 2300 watts ? Our current robot is 600 Watts total power and it is almost the same. The soldering tip is 400 Watts and it has PC inside. So I expect the motors to be no more 150 Watss totally. But here we have 2300 Watts? I am just curious what is so powerful ?
 

R: The machine is total 750W, including the soldering heater 150W.
12.- Do we need air for the machine and if so how much ?

R: Yes, need air. In generally, it works by 2-3 kg/c. Do you have a air pump in your factory? If yes, it is enough, because standard industrial air pump has 6-7 kg/c.
13.- Also do you have soldering tip like below (this is what we use right now)?

R: Yes, we could custom make according to your soldering requirements based on your PCB if we don't have exsiting tips.

14.- I forgot to ask you also if it is possible to program arrays with the robot.

R:Yes, it is ok to program arrays.

15.-What is the speed for x-y movement?

R:X/Y axis is 600mm/s, max speed for Z axis is 400mm/s

 


CONTACT US

Contact: Doreen

Phone: 13537348526 (Skype:s2@smtfly.com)

Tel: 86-0755-33581320

Email: s2@smtfly.com

Add: Building 2, Gang Hua Xing Industrial Park, Chongqing Road, Fuyong Town, Shenzhen, China 518103